01Ice and Water
Water Inlet Valve Replacement Cost
Parts and labour, this repair
$290–$860
Ice maker, water valve or supply line
The ice module in a freezer compartment, its inlet valve and the supply line up to the shut-off. Scale and a starved supply are both in here, and both are cheaper than they sound.
The visit itself is $89, and that comes off the repair the moment you say go. Everything above is the work that follows, on your cabinet, agreed as one figure first.
What is included
- Pressure and the shut-off checked first, so a starved supply is not read as a dead valve
- The valve, its fitting, and whatever length of line was leaking or furred with scale
- One fill and one harvest watched right through before the grille goes back on
What changes the price
- Access, since a valve at the back of the machine bay takes more of the hour
- Whether the supply line is kinked or scaled and goes out with the valve
- Whether the household shut-off feeding the cabinet has seized, which belongs to a plumber
The cheapest ice fault hides behind the dearest symptom
An empty bin looks identical whatever caused it. The valve gets tested early because it is quick to read and quick to change, and because everything upstream of it — a closed shut-off, a line pinched behind the cabinet — costs nothing at all to rule out.
What gives it away
A valve that has stopped opening leaves the module cycling dry, harvesting nothing. A valve that has stopped closing leaves a trickle, and that freezes where it lands: a lump under the bin, or a stripe down the liner. One watched fill tells the two apart.
Where this goes next
A valve that drips rather than shutting turns up aswater tracking down the inside wall, which has other causes behind it too.
Where the module itself is the part that has died, that isan ice maker replacement, a larger piece of the same band.
Watching a single fill separates them, and that happens onthe $89 visit.
Asked before the visit
Is a valve cheaper to replace than the ice maker itself?
Yes, and it is the part worth ruling in or out first. Both sit inside the same price band, but a valve is a smaller piece of hardware and a shorter job, so the figure lands nearer the bottom of that band than the top of it.
The ice maker stopped completely. Is the valve always the reason?
No. A closed shut-off, a kinked line, a frozen fill tube and a failed module all end the same way, with an empty bin. Watching one fill attempt tells you which. Sub-Zero Repair Experts Los Angeles checks the cheap causes first, in that order — (310) 496-3358.
Afterwards
What people said once the kitchen was back together
Built-in Sub-Zero calls on both sides of the pass.
Owners on this route5.0/ 5845 reviews
Ours lives outside by the pool and had dropped to a trickle of hollow cubes. He measured the fill and found the valve strainer choked with grit. Cleared it, and the bin was full overnight.
Bethany F.Studio City
The unit sits in a hot pass-through off the kitchen and tripped its high temperature warning every afternoon. A remodel had left the toe kick blocking airflow at the base. Trimmed back, cleaned, no more warnings.
Odette Q.Sherman Oaks
Puddles kept turning up beneath the crisper drawers of a 1920s kitchen we had just redone. Plugged drain tube and a soft door seal, both dealt with in one visit. The arrival window slipped two hours.
Gustavo B.Los Feliz
Water inlet valve, quoted before it is started
Tell us what the freezer is doing and you will hear which band it lands in. Phone answered 24/7.